Важные исправаления и доработки вертолетов Rotorway Exec 90, Exec 162-F и A600 Talon.
Сервисные бюллетени 
ВЕРТОЛЕТНАЯ БИБЛИОТЕКАПожалуйста ознакомьтесь с важными исправлениями и доработками вертолетов Rotorway Exec 90, Exec 162-F и A600 Talon. Выделенные красным текстом бюллетени обязательны к исполнению. Спасибо.
| Важное! | Дата: | Относится к модели: | Название: |
| M-01 | 12-90 | EXEC 90 | MAIN DRIVE PULLEY, OIL PRESS. PLUG |
| M-02 | 3-21-91 | EXEC 90 | AIRFRAME REINFORCEMENT TUBES |
| M-03 | 5-15-92 | EXEC 90 | OIL BATH MOUNTING |
| M-04 | 5-15-92 | EXEC 90 | SKID INSERT TUBE |
| M-05 | 5-15-92 | EXEC 90 | TAIL BOOM ATTACHMENT BRACKETS |
| M-06 | 9-8-92 | EXEC 90 | MAIN SPROCKET BOLTS |
| M-07 | 9-8-92 | EXEC 90 | TAIL ROTOR BELTS |
| M-08 | 3-15-93 | EXEC 90 W/ENGINE # 5175 to 5203, 5206, 5207 | INTAKE VALVE POLISHING |
| M-09 | 9-28-94 | ALL BLADES MADE AFTER 9/90 | POSSIBLE DELAMINATION |
| M-09ACTION | 11-28-94 | ALL BLADES MADE AFTER 9/90 | BLADE REWORK |
| M-10 | 5-12-95 | EXEC 162F | INERTIA SWITCH |
| M-11 | 5-12-95 | EXEC 90, EXEC 162F | UPPER SECONDARY BEARING |
| M-12 | 5-12-95 | EXEC 162F W/ENGINE # 6001-6030 | IGNITION SENSORS |
| M-13 | 7-24-95 | EXEC 162F | FADEC WIRING HARNESS |
| M-14 | 1-2-97 | EXEC 90, EXEC 162F | CAM GEAR REPLACEMENT |
| M-15 | 5-5-97 | EXEC 162F W ENGINE #6028 to 6038 | CONNECTING ROD INSPECTION |
| M-16 | 3-3-98 | EXEC 90, EXEC 162F | THROTTLE CABLE INSPECTION |
| M-17 | 4-21-98 | EXEC 90, EXEC 162F | DUAL THROTTLE SHAFT INSPECTION |
| M-18 | 8-18-99 | EXEC 162F DELIVERED 7/95 to 12/96 | FUEL HOSE LEAKS |
| M-19 | 1-16-01 | EXEC 162F | FUEL PRESSURE EQUALIZATION |
| M-20 | 4-4-02 | EXEC 90, EXEC 162F | TAIL ROTOR BELT INSTALLATION |
| M-21 | 3-14-03 | EXEC 90, EXEC 162F | SECONDARY SHAFT INSPECTION |
| M-22 | 7-7-03 | EXEC 162F | FUEL TANK FITTING RUBBER SEAL |
| M-23 | 10-25-04 | EXEC 162F DELIVERED 9/24/04 to 10/14/04 | FUEL FILLER CAPS |
| M-24 | 6-16-05 | EXEC 162F | FUEL TANK FITTING RUBBER SEAL |
| M-25 | 9-10-08 | A600 TALON | GEARBOX MOUNTING |
| M-26 | 6-15-10 | A600 TALON | GEARBOX BELT TENSIONER |
| | |||
| ADVISORY # | DATE | TO | SUBJECT |
| A-01 | 12-90 | EXEC 90 | ALIGNER BLOCKS |
| A-02 | 4-4-91 | EXEC | AIRFRAME REINFORCEMENT TUBES |
| A-03 | 12-3-91 | EXEC 90 | ALTERNATOR MOUNTING ARM |
| A-04 | 12-6-91 | EXEC 90 | OVERFLOW TANK & COOLANT |
| A-05 | 5-15-92 | EXEC | TAIL BOOM ATTACHMENT BRACKETS |
| A-06 | 5-15-92 | EXEC | 1-3/4" MAIN ROTOR SHAFT |
| A-07 | 5-15-92 | EXEC | ELECTRONIC IGNITION |
| A-08 | 5-15-92 | EXEC | FUEL GAUGE SENDER |
| A-09 | 5-15-92 | EXEC | VALVE TRAIN INSPECTION |
| A-10 | 5-15-92 | EXEC | AIRFRAME REINFORCEMENT TUBES |
| A-11 | 9-8-92 | EXEC | SPROCKET TO HUB BOLTS |
| A-12 | 9-8-92 | EXEC | TAIL ROTOR BELTS |
| A-13 | 9-8-92 | EXEC 90 | UPPER SECONDARY SHAFT BEARING |
| A-14 | 9-8-92 | EXEC 90, EXEC W/RI-162 ENGINE CONVERSION | WATERJACKET CASTINGS |
| A-15 | 9-8-92 | EXEC 90, EXEC | MAIN ROTOR BLADE CHECK |
| A-16 | 3-15-93 | EXEC 90, EXEC W/DUAL IGNITION CONVERSION | GROUND WIRES |
| A-17 | 3-15-93 | EXEC 90 | REAR LANDING GEAR BRACKET |
| A-18 | 3-15-93 | EXEC 90 | VALVE GUIDE INSPECTION |
| A-19 | 10-5-94 | ALL PRE-9/90 BLADES | M/R BLADE DELAMINATION |
| A-19ACTION | 12-5-94 | ALL PRE-9/90 BLADES | M/R BLADE MODIFICATION |
| A-20 | 10-28-94 | EXEC, EXEC 90, EXEC 162F | TAIL ROTOR BELTS, MONITORING |
| A-21 | 5-12-95 | EXEC, EXEC 90, EXEC 162F | TAIL ROTOR BELTS |
| A-22 | 5-12-95 | EXEC 162F | SEAT CUSHION MODIFICATION |
| A-23 | 5-12-95 | EXEC | UPPER SECONDARY BEARING |
| A-24 | 5-12-95 | EXEC, EXEC 90 | INERTIA SWITCH |
| A-25 | 12-21-95 | EXEC, EXEC 90, EXEC 162F | TAIL ROTOR BELTS, COLD WEATHER |
| A-26 | 5-20-96 | EXEC, EXEC 90, EXEC 162F | SECONDARY SHAFT |
| A-27 | 5-20-96 | EXEC, EXEC 90, EXEC 162F | INCREASED COMPONENT LIFETIMES |
| A-28 | 5-20-96 | EXEC, EXEC 90, EXEC 162F | ELASTOMERIC BEARINGS |
| A-29 | 5-20-96 | EXEC, EXEC 90, EXEC 162F | ELECTRICAL INTERFERENCE PROBLEMS |
| A-30 | 1-2-97 | EXEC | CAM GEAR REPLACEMENT |
| A-31 | 3-3-98 | SINGLE CARB ENGINES | THROTTLE CABLE INSPECTION |
| A-32 | 7-1-98 | EXEC, EXEC 90, EXEC 162F | SECONDARY DRIVE UNIT INSTALLATION |
| A-33 | 10-9-98 | EXEC, EXEC 90 | CARB HEAT |
| A-34 | 2-23-00 | EXEC 162F | SECONDARY SHAFT |
| A-35 | 9-21-01 | EXEC 162F, ENGINES W/REVERSE COOLING | AIR BLEED VALVE |
| A-36 | 4-4-02 | EXEC | TAIL ROTOR BELT INSTALLATION |
| A-37 | 4-4-02 | EXEC, EXEC 90, EXEC 162F | THROTTLE LINKAGE |
| A-38 | 5-2-02 | EXEC, EXEC 90, EXEC 162F | SECONDARY SHAFT |
| A-39 | 3-14-03 | EXEC | SECONDARY SHAFT INSPECTION |
| A-40 | 1-24-05 | EXEC, EXEC 90, EXEC 162F | THROTTLE CORRELATION |
| A-41 | 1-30-07 | EXEC 162F WITH ACIS | ACIS |
| A-42 | 1-30-07 | EXEC 162F WITH ACIS | ACIS IDLER PULLEY |
| A-43 | 12-29-08 | EXEC, EXEC 90, EXEC 162F | LOWER SECONDARY UPDATE |
| A-44 | 11-09-10 | ACIS EQUIPPED TALON AND 162F SHIPS | EXCESSIVE ACIS AIR INLET TEMPERATURE |
| A-45 | 12-21-10 | EXEC, EXEC 90, EXEC 162F, TALON | EXEC OWNERS WITH TALON LANDING GEAR CONVERSIONS |
| A-46 | 12-21-10 | EXEC, EXEC 90, EXEC 162F, TALON | TALON OWNERS AND ALL EXEC OWNERS WITH TALON TAIL ROTOR DRIVE SHAFTS |
| A-47 | 12-21-10 | EXEC, EXEC 90, EXEC 162F, TALON | TALON AIRCRAFT KITS SHIPPED FROM 10/14/08 ? 7/8/10 AND EXEC OWNERS WITH ELECTRIC CLUTCH CONVERSIONS IN THE SAME TIME FRAME |
| SERVICE BULLETIN | DATE | TO | SUBJECT |
| 9-25-08 | A600 TALON | FADEC WIRING HARNESS | |
| 4-28-08 | COLLECTIVE ASSEMBLY | THROTTLE SHAFT | |
| SECONDARY | 6-2-00 | SECONDARY SHAFT SERIAL NUMBERS 5739 TO 5798 | NEW UPPER MOUNT BEARING, INSTRUCTIONS FOR ADDING GREASE |
| FADEC | 9-27-01 | EXEC 162F WITH SINGLE ECU | ECU FIRMWARE |
| CAM GEAR | 6-16-05 | EXEC, EXEC 90, EXEC 162F | TIMING GEAR LIFETIME INCREASED |
| SECONDARY | 6-16-05 | EXEC, EXEC 90, EXEC 162F | LOWER SECONDARY INSPECTION |
| COLLECTIVE | 3-8-06 | AIRFRAME S/N 6670-6736 | COLLECTIVE CONTROL ROD MATERIAL |
Rotorway Россия и СНГ
